For model fitment information, see the P&A Retail Catalog or the Parts and Accessories section of www.harley-davidson.com (English only).
Installation RequirementsSeparate purchase and installation of extra parts or accessories may be required for proper installation of this kit. See the Sreamin' Eagle ® Pro Catalog or contact a Harley-Davidson ® Dealer.
Discard 4 in head gasket included with the top end gasket kit (part number 17349-07B). Use the Multi-Layer Steel 4.125 in head gasket included with the piston and cylinder kit.
WARNING
Rider and passenger safety depend upon the correct installation of this kit. Use the appropriate service manual procedures. If the procedure is not within your capabilities or you do not have the correct tools, have a Harley-Davidson dealer perform the installation. Improper installation of this kit could result in death or serious injury. (00333b)
This instruction sheet references service manual information. A service manual for your model motorcycle is required for this installation. One is available from a Harley-Davidson dealer.
Kit Contents See Figure 1 to Figure 3 , and Table 1 to Table 3.The kit is intended for High Performance applications only. This Kit is not legal for sale or use on pollution controlled motor vehicles. This kit may reduce or void the limited vehicle warranty.
Engine-related performance parts are intended FOR THE EXPERIENCED RIDER ONLY. Prepare for Service
WARNING
When servicing the fuel system, do not smoke or allow open flame or sparks in the vicinity. Gasoline is extremely flammable and highly explosive, which could result in death or serious injury. (00330a)
Remove Engine Components See the service manual. Remove existing air cleaner assembly. See the service manual. Remove existing exhaust system. See the service manual. Disassemble engine top end and cam plate assembly. See the service manual. Remove existing clutch diaphragm spring. INSTALLATION Install Engine and Clutch Components See Figure 3. Install new inner cam bearings included with Kit.See Figure 1 through Figure 3. See the service manual. Assemble cams to camplate, performance cylinder heads and engine top end using parts from kit.
Assemble throttle body and injectors from kit using original equipment fuel line and fuel rail. Refer to instructions in the supplied throttle body kit.
Install throttle body assembly to engine using intake flanges and seals supplied in the throttle body kit. Refer to instructions from the supplied throttle body kit.
2008 through 2012 Models only: See the service manual. Install clutch diaphragm spring from kit. See the service manual. Install exhaust system. Install air cleaner assembly. Follow instructions in air cleaner kit. Final AssemblyYou must recalibrate the ECM when installing this kit. Failure to properly recalibrate the ECM can result in severe engine damage. (00399b)
